home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-17
/
floptica.zip
/
README
< prev
Wrap
Text File
|
1992-09-24
|
1KB
|
31 lines
The FLPTICAL.SYS driver supplied on this diskette is for use
with the Insite Peripherals 21 MByte Floptical disk drive.
Please follow the instructions below for installation.
Attach floptical drive to your system as described in the
floptical drive installation guide. Pay particular attention to
avoid SCSI ID conflicts. Ensure that the SCSI bus is correctly
terminated. Note that the floptical drive must be connected to
the SCSI cable, correctly terminated and must have power applied
to be recognized by the adapter.
To install the driver, copy the FLPTICAL.SYS file to your boot
drive and add the following line to your CONFIG.SYS:
DEVICE=C:\PATH\FLPTICAL.SYS [/Sxx]
Where "C:\PATH" is the drive and directory to which you copied
the floptical driver and "/S" enables cache with "xx" being the
number of 1024 byte cache blocks to reserve. The default is no
cache and the maximum number of cache blocks is les than 32
NOTE
=====
The FLPTICAL.SYS driver is ASPI based. Make certain to load the
Always ASPI manager **Before** the FLPTICAL.SYS driver in your
CONFIG.SYS. See README in the \ASPI subdirectory of this
diskette for more information.